For the next twelve days, the workshop lights burned from five in the morning until long past midnight.
Removing the dead engine from the International 986 took the better part of two days. Decades-old bolts resisted every impact wrench, requiring heat from the acetylene torch and muscle to break free. When the ruined block was finally hoisted out, the front of the tractor looked hollow.
Then came the real nightmare: geometry.
The combine engine was longer, heavier, and sat at a different angle than the original motor. Ethan spent hours with a digital caliper and a notebook, taking hundreds of precise measurements.
Working with heavy steel plate, the brothers built a custom adapter plate to marry the combine engine’s flywheel to the tractor’s transmission housing. Ethan cut a cardboard pattern first, transfering every bolt hole by hand. Ryan cut the thick steel with a plasma torch. A mistake of even one-sixteenth of an inch would create an off-center vibration that would shatter the bearings in minutes.
On their third attempt, the heavy steel plate slid into place over the dowel pins. The input shaft clicked smoothly into the clutch pack.
“That shouldn't have worked,” Ryan breathed, wiping sweat from his forehead.
“It hasn't worked yet,” Ethan reminded him.
Next came the engine mounts. Ethan cut away the factory brackets and welded reinforced steel channels directly to the main frame rails. Sparks showered the concrete floor late into the night as Ethan crouched under the chassis, wearing his father’s old fiber-metal welding helmet.
They scavenged parts from around the farm. They used the massive radiator from the combine to handle the extra heat, which required cutting the tractor’s front grill and extending the nose by four inches. They re-routed hydraulic lines, built custom throttle linkages, and mounted a heavy-duty power steering pump driven off the front crankshaft pulley.
Their mother, Elaine, brought plates of fried chicken and thermoses of black coffee out to the shop on the ninth night. She looked at the strange, aggressive-looking machine taking shape. The widened hood was a patchwork of bare steel and red paint; the exhaust pipe rose straight up out of the hood like a chrome smokestack.
“Your father would either be immensely proud or completely terrified,” she said softly.
“What are you going to call it?” Ryan asked, chewing on a drumstick.
Ethan tightened a clamp on the upper radiator hose. “It doesn't need a name.”
“Every machine Dad modified had a name,” Ryan insisted. “We’re calling it Old Harold.”
Ethan paused, looking at the raw, iron beast they had assembled. “He’d hate that.”
“Which is why it’s perfect,” Ryan grinned.
The First Smoke
On the fourteenth day, spring planting was less than forty-eight hours away.
The tractor sat in the center of the shop floor. The fluids were filled, the custom wiring harness was taped, and the heavy-duty battery was hooked up.
Ethan climbed into the high, narrow cab of the 986. Ryan stood ten feet back, holding a fire extinguisher.